HOME     ABOUT US     NEWS     QUALITY     PRODUCTS     ENERGY SAVINGS     CONTACT US


Hunter LED Street Lights

Hunter  initiated LED street lamps in 1998 and launched high power LED street lamps to the market in Sep. 2006. High-power LED street lamps have become the most economic, environmental friendly and energy-saving choice for street lighting in the world. Now Hunter has had a complete LED outdoor lighting product line including LED street light, solar LED street light, LED tunnel light, LED flood light, LED parking light, LED canopy light, LED high bay light, etc.

Hunter LED street lamps are applied with top chip from CREE, and special quadric optical lens, which will maximize the light output and minimize the light consumption by casting rays onto a rectangular area. Patented heat dissipation structure and quality driver  ensure a stable performance of LED street lights and a lifespan over 10 years.

Now LED street lights from Hunter have received CE, CB, FCC, UL and RoHS approval and Hunter has been the first and only enterprise whose LED products are insured by PICC.
FAQ,s

How about the replacement between LED Street Light and High Press Sodium Light?

Hunter HLS-E/A series 28W, 42W LED street light can replace 75W high press sodium light.

Hunter HLS-E/A series 56W, 70W, 84W LED street light can replace 150W HPS light.

Hunter HLS-E/A series 98W, 112W, 126W, 140W LED street light can replace 250W HPS light.

Hunter HLS-E/A series 140W, 168W, 182W, 196W, 210W LED Street Light can replace 400W HPS light.

Hunter RL2R series Apollo 61W LED street light with 28pcs of LED can replace 150W HPS light.

Hunter RL2R series Apollo 91W LED street light with 42pcs of LED can replace 250W HPS light.

Hunter RL2R series Apollo 153W LED street light with 70pcs of LED can replace 400W HPS light.

Hunter RL2R series Apollo 244W LED street light with 112pcs of LED can replace 600W HPS light.

What is the lifespan of the LED Street Light?

Normally, we calculate the lifetime of Hunter LED street light based on the brightness decreased. When the brightness of a LED street light decreases to 70% of the original, we could say the lifetime of LED street light is over theoretically, but actually the light is still functioning normally.

How many LED street lights have been installed?

More than 500,000pcs of LED street lights have been installed all over the world (Data updated in October 2012).

Which kind of LED chip does Hunter LED lighting products use?

We use Cree X-Lamp series LED.

Comparison between LED & HPS lights

Colour Rendering of LED & HPS

The CRI of white LED is over 75, while that of well-encapsulated LED reaching 98, which makes the colour of the objects lightened appear natural.

The CRI of HPS is much weaker, with a CRI less of 23, and the objects lightened appear reddish.

Colour Temperature of LED & HPS

The colour temperature of LED ranging from 2600k to 10000k.According to different functional lumination requirements, there are warm white, pure white and cold white for option.

The colour temperature of HPS ranging from 1950k to 2250k.With a reddish light, it makes people feel warm.

Colour temperature is a characteristic of visible light that has important applications in lighting, photography, videography, publishing, and other fields. The colour temperature of a light source is determined by comparing its chromaticity with that of an ideal black-body radiator. The temperature (usually measured in kelvins (K) ) at which the heated black-body radiator matches the colour of the light source is that source's colour temperature; for a black body source, it is directly related to Planck's law and Wien's displacement law.

Counterintuitively, higher colour temperatures (5000 K or more) are "cool" (green–blue) colours, and lower colour temperatures (2700–3000 K) "warm" (yellow–red) colours.

In road and street lighting, the light penetrability mainly refers to the ability of penetrating through rain and fog.

The effect of foggy or rainy weather on the road lighting is reflected in that the light scattering of the suspended particle in the fog and the raindrop debases the penetrability, which leads to the drop of illumination intensity directly. The relevant theory is based on Rayleigh’s law of scattering and G. Mie.P.Debye’s law. The application scope of visible light scattering law is listed below: r represents the particle’s radius. When r<0.037 µ m, Rayleigh’s law of scattering works; when r>0.037µ m, G. Mie,P.Debye law comes into effect. The light scattering effect of Rayleigh’s is connected with wave length, while that of G. Mie,P.Debye is not. The radius of suspended partial in the fog and rain is as follows: 2.8µm~10µm in the fog, 10µm~5000µm in the raindrop. Since the particle radius is far over 0.037µm, there exists no connection between the light scattering and wave length in foggy or rainy weather, i.e., there lies no connection between the penetrability of road lighting and the colour of light.

Hunter, as the leading company in LED roadway and street lighting industry, began to develop high power led road light in 1998 and made mass production in 2007. With more than 18 years experience in led R&D and applications, Hunter led street lights have now 20 provinces and are installed in more than 80 cities around the world.

Hunter high power LED street light has superior performance in energy saving, environmental protection, long lifespan , perfect colour rendering , etc. Applied with the best LED chip Cree, it attains over 90lm illumination efficiency, accelerated by our unique quadric optics lens, the lamp's efficiency reaches more than 90%.

Meanwhile, a respiratory system has been designed to ensure the dust resistance, water resistance and self cleaning ability.


Hunter products recently installed LED display in South Beauty Restaurant

Hunter brand has recently installed an LED display in the banquet hall of South Beauty Restaurant newly opened in Jinan, contributing great dynamic charm to the dining environment.

South Beauty is one of the largest-scale dining management groups continuing to hold some of the greatest development potential in China, and plays a leading role in the spread of Chinese culinary culture around the world. This newly opened branch in Jinan, Shandong has an area of over 3,000 square meters and is the second largest branch all over China.

Winning the bidding out of a number of competitors, Hunter  provides South Beauty a series of service including marketing research, design, product picking, installation and adjustment to assure a best art effect. Considering the restaurant orientates in high-level commercial or political banquet or family gathering, Hunter combines South Beauty’s pursuit of detailed service and consumer’s visual habits, which leads to a perfect integration of the LED display and lighting in the hall and produces an elegant atmosphere.

15.02.2012
Analysis on Development of Asia LED Indoor Lighting Market

Affected by multiple factors and fast development, it’s hard for people to predict the domestic LED indoor lighting market share. Many believe the market share would reach 10% in 2012, 30% in 2015, and 50% in 2020. However, the survey with LED lighting popularization schedule shows, many people hold a relative optimistic attitude. Officials from Osram consider the market share of LED indoor  lighting might reach 80% in 2020, the huge design space for LED will also bring along the development of correlative market except the enlarging lighting market scale, and the integral market scale is enormous.

Generally, the development of the LED bulb market could be divided into three phases. Fluorescent lamp, incandescent lamp and energy-saving lamp are main light source of bulb for indoor lighting before 2012, when LED cost comparably higher, only could be the retrofit of incandescent lamps for demonstration. During 2012-2014, incandescent lamps would gradually disappear from the market along with the phasing-out policy. Energy-saving light market is predicted to grow rapidly and take up an important share. However LED lamp would replace incandescent and fluorescent lamp substantially till 2014. Meanwhile its cost and price decreases constantly due to the increasing manufacturer, which could much possibly cause a boom in LED market for one or two years ahead of time.


CRI and Luminous Efficiency--Determinants of LED Lights

colour Rendering Index has drawn increasing attention in lighting field as well as high luminous efficiency, especially the indoor illumination. For example, the low pressure sodium light has a luminous efficiency of nearly 200lm/W but could only be applied in road lighting or some very few occasions due to low CRI caused by its mono chrome yellow light. The US DOE has raised the CRI of LED lights for indoor lighting from the original 70 (Aug.2007) to latest over 80 (Dec.2009), and in China lamination design standard, it is stipulated that the CRI in all the offices and restaurants should be 80 for the least.

The best white light, concluded by Mr. Zhang Haicong Chairman of Shanghai Lighting Association, is that has both high luminous efficiency and high CRI, which could be correspondent with the lighting environment and object. That a higher luminous efficiency than traditional lights and a CRI over 80 should be regarded as the bottom line of choosing LED lights for indoor lighting.


Sales of incandescent bulb gets banned from Oct. 2012

National Development and Reform Commission of China has released exposure draft for phase-out of incandescent light bulb recently. Products concerned are ordinary lighting bulbs, reflection incandescent LED bulbs , LED spotlights, decorative lights and those for special usage are not included.

The manufacturing and sales amount of incandescent LED light bulb reached 3.85 billion and 1.07 billion in 2010, as reported, and electricity consumed on lighting takes 12% of the total consumption. If all the incandescent being used could be replaced by energy-saving lights, electricity with a total amount of 48 billion kwh could be conserved annually.
The phase-out will be carried out as below: ordinary lighting bulbs over 100 watts get banned in selling and import from Oct.1, 012, 60 watts from Oct.1, 2014 and 15 watts from Oct. 1, 2016.


Global LED Market Increasing by 6.2% in 2009

As is revealed in the report "Reviews and Prospects of Global High Brightness LED Market of 2010 " released by Strategies Unlimited recently, the global LED market rises to 3.3 billion pounds  in 2009 from 3 billion million in 2008, increasing by 6.2% compared with the same period.

The report also points out that, as demands for LED TV increased, sales of LED for display reached 230 million with a year-on-year increase of 178%.

The investigation report indicates, stated by Lee Sang-min, vice president of sales from Seoul semiconductor, and though the sales amount of LED television was 10% lower than that of the whole LED market, it was satisfying in other fields of LED application in 2009. The supply quantity of LED for LED TV is expected to increase significantly in China Mainland, Japan and Taiwan this year, thus enhancing the sales of relevant LED products correspondingly. In addition, LED illumination is considered as the new growth engine of LED market.


LED inside: penetration of LED light bulbs to reach 30% in 2014

According to LED inside’s survey, the global lighting market value in 2009 is about 45 billion pounds, and the LED value only takes about 1.4 billion with only 3.3% penetration rate in LED lighting.

While LED lighting has a high efficiency, long life, and other advantages, the retail prices of the current stage LED lighting, compared with the traditional lighting, still exist a 4-6 times price gap, which is quite difficult for most consumers to accept. Therefore, LED lighting still has a long way to go to become more common.

The key to popularize LED lighting are as follows - subsidy policies, industry standards, LED lighting cost reduction, supply chain integration and other factors. Currently, Asian countries are the most supportive and positive for LED lighting subsidy policies and also relatively fast in standard-setting. Under the vigorous expansion of LED lighting manufacturers, LED lighting costs continue to decline.

The conditions of LED lighting industry present different situations as the electricity fee and subsidy policies differ in each individual country. Currently, the electricity costs  in Japan, Germany, UK  and other countries are relatively higher than other regions, so the usage of high-efficient LED lighting applications is in a much more rapid progress compared to other countries.

In LED lighting applications, the incandescent light bulbs will be banned in 2012, which gives LED lighting market an enormous business opportunity. LED Bulbs of all lighting applications, will be the fastest growing application. LED inside estimated that the penetration rate of LED light bulbs is expected to reach over 30% of total light bulb market by 2014.


Cree Sets a New Standard for Indoor LED Lighting with the XLamp MX-6 LED, Industry’s First Lighting-Class PLCC LED

Cree, Inc. extends its lighting-class LED leadership into PLCC LEDs with the commercial availability of the new XLamp® MX-6 LED. The MX-6 LED offers the performance and reliability that customers expect from Cree XLamp LEDs with enhanced light uniformity and low power consumption.

“With the addition of the XLamp MX-6 LED, we now have the most diverse family of lighting-class LEDs in the industry,” said Paul Thieken, Cree marketing director, LED components. “The XLamp MX-6 LED can provide better design options for indoor applications, including under-cabinet, retail displays LED light bulbs and fluorescent replacements.”

The XLamp MX-6 LED provides up to 130 lumens for cool white and 107 lumens for warm white at 350 mA. The XLamp MX-6 LED can also reduce luminaire and lamp manufacturing costs through an increased shelf life with reduced moisture sensitivity, and the smallest warm white bins in the industry, enhancing LED-to-LED colour consistency.

  CONTACT US